11-28-2016 04:15 AM - edited 03-17-2019 08:47 AM
Hey, everybody,
I'm going to deploy cisco 8821 wireless phone on CME. I would like to know if it's possible to find any configuration/deployment guide for this combination? All I'm able to find is deployment of 8821 on CUCM, but nothing for CME. Maybe somebody could help me with this case?
Solved! Go to Solution.
11-28-2016 11:01 PM
Hi,
8821 is supported in fast track mode on CME 10.5, check below.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme105spc.html
Sample configuration to register using Fast Track method:
voice register pool-type 8821
phoneload-support
reference-pooltype 9971
voice register dn 10
number 8000
voice register pool 10
id mac 1111.2222.3333 [ Mac address of the phone ]
type 8821
number 1 dn 10
username cisco password cisco
voice register global
create profile
JB
11-28-2016 04:59 AM
Hi,
Can you past "show telephony" from your CME.
JB
11-28-2016 10:54 PM
Hello,
You need this part?
CONFIG (Version=10.5)
=====================
Version 10.5
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
11-28-2016 11:01 PM
Hi,
8821 is supported in fast track mode on CME 10.5, check below.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme105spc.html
Sample configuration to register using Fast Track method:
voice register pool-type 8821
phoneload-support
reference-pooltype 9971
voice register dn 10
number 8000
voice register pool 10
id mac 1111.2222.3333 [ Mac address of the phone ]
type 8821
number 1 dn 10
username cisco password cisco
voice register global
create profile
JB
11-29-2016 03:46 AM
Thank you so much. This will be really helpful. By the way. What if I would use higher version of CME (11; 11,5 for example)? Would I have to change anything on your configuration?
11-29-2016 04:00 AM
If you upgrade CEM to 11, 11,5 you dont have to use Fast Track method any more, you can configure it like other SIP native endpoints.
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-express/datasheet-c78-737647.html
JB
11-29-2016 06:18 AM
Thank you one more time!
11-29-2016 06:21 AM
Happy to help,
You can mark the post as answered if you dont have further questions.
JB
04-26-2017 12:14 AM
Hi for all , I have CME 11.6 with wireless Ip phone 8821 firmware version 11.0 .
they are registered normally but transfer button is not showing even I created sofkeys template
please advise , thank you
02-19-2020 05:15 AM
Just an update on this comment, per the compatibility matrix CME 11 and 11.5 supports IP Phones 8821 but still only on Fast Track Mode:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme115spc.html
05-18-2018 02:39 AM
Hello.
reference-pooltype 9971
Can you please explain what this number 9971 refers to, what it actually is?
Thank you.
05-18-2018 05:52 AM
06-29-2023 11:17 AM
Hi Jitender,
I have one 8821 working fine one CME 10.5 with username cisco password cisco but few days ago I bought another 8821 and can't find phone username. this time is not cisco.
How can I found out phone username?
Thank you.
06-03-2021 06:53 AM
I included CME info in the 8821 DG a while back.
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cuipph/8821/english/Deployment/8821_wlandg.pdf
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: