cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
697
Views
14
Helpful
22
Replies
Highlighted
Cisco Employee

Here is what I imagine will

Here is what I imagine will have the least impact (and I'll probably lab it up to be sure)

  1. Notate in a spreadsheet the existing device defaults for each device
  2. Install the device pack on the server (do I only need to do this connected to the pub or will I need to do this on each of them?)
  3. Before doing anything else, change each device's default load back to what it was
  4. Reboot cluster

Regarding rebooting the cluster, should these be done one at a time waiting for one to come up before rebooting the next? We have some subs where TFTP has been offloaded . I assume everything will need to be rebooted.

Highlighted
Hall of Fame Community Legend

Hi Chris, Here we go  1.

Hi Chris,

 

Here we go smiley

 

1. Exactly

 

2. Apply to Pub then TFTP servers then all Subs.

 

3. Exactly

 

4. reboot Pub wait for it to come back up, then TFTP servers, then Subs (I prefer one at a time)

 

Cheers!

Rob

Highlighted
Cisco Employee

One other question I had. I

One other question I had. I assume I only need to change device defaults back on the pub correct and then that change will filter to all the subs?

Highlighted
Rising star

It will replicate to the

It will replicate to the other nodes assuming replication is working okay.

Highlighted
Cisco Employee

Ok, I figured as much but

Ok, I figured as much but wanted to make sure.

Highlighted
Cisco Employee

Looks like the dbreplication

Looks like the dbreplication status is all 2's so that's a good sign.

Highlighted
Cisco Employee

BTW, I meant to say congrats

BTW, I meant to say congrats on the new gig Brian!

Highlighted
Rising star

Thanks man!

Thanks man!