03-18-2014 09:25 AM - edited 03-16-2019 10:09 PM
Hello,
I've bought an Cisco 887VA-V-W, I can't activate the voice part of the ISR. I've accept the license end user agreement, reload the router but nothing works,
Here is the show ver :
ISR-TEST#sh version
Cisco IOS Software, C880 Software (C880VOICE-UNIVERSALK9-M), Version 15.2(4)M4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Thu 20-Jun-13 16:56 by prod_rel_team
ROM: System Bootstrap, Version 15.1(2r)T3, RELEASE SOFTWARE (fc1)
ISR-TEST uptime is 1 day, 2 hours, 1 minute
System returned to ROM by reload at 14:14:13 UTC Mon Mar 17 2014
System restarted at 14:15:13 UTC Mon Mar 17 2014
System image file is "flash:c880voice-universalk9-mz.152-4.M4.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco 887VA-V (MPC8300) processor (revision 1.0) with 498688K/25600K bytes of memory.
Processor board ID FCZ174990TU
1 DSL controller
1 Ethernet interface
4 FastEthernet interfaces
1 Gigabit Ethernet interface
3 ISDN Basic Rate interfaces
1 ATM interface
1 terminal line
1 Virtual Private Network (VPN) Module
4 Voice FXS interfaces
1 DSP, 16 Voice resources
1 cisco Embedded AP (s)
256K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 C887VA-V-W-E-K9 FCZ174990TU
License Information for 'c880-srst'
License Level: advipservices Type: Permanent
Next reboot license Level: advipservices
Configuration register is 0x2102
And here the show license :
ISR-TEST#sh license
Index 1 Feature: advipservices
Period left: Life time
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium
Index 2 Feature: SSL_VPN
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: 0/0 (In-use/Violation)
License Priority: None
Index 3 Feature: ios-ips-update
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
ISR-TEST#
The ISR is regitered with my CUCM (v 7.1.5) but the voice Bri stay unregistered.
If someone as an idea on how to use the voice BRI on the ISR.
Regards,
Mathieu
03-18-2014 09:56 AM
Hi Mathieu,
what is the protocol u are using for regsitering with CUCM?
if using MGCP, try H.323. there is a bug associated
regds,
aman
03-18-2014 10:01 AM
03-25-2014 01:37 AM
Hi Aman,
Thanks for all your replies, i finally setup my ISR with H323 and everything is working. I'm waiting to see if there is a solution to use MGCP.
Regards
03-25-2014 02:17 AM
Hi Mathieu,
there was a recent discussion on same issue and issue has not been resolved even with CUCM 10
https://supportforums.cisco.com/discussion/12149611/unable-register-both-bri-ports-c887va-v-using-mgcp-bug-cscuj54849
regds,
aman
03-19-2014 03:45 AM
Hi aman,
thanks for your reply. I use MGCP for the gateway, I'll try to set up H323 to see if it's work.
Do you know when MGCP will be supported by the 887VA? Do you think I can use SCCP for the ISR?
Regards,
Mathieu
03-19-2014 09:14 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide