cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
878
Views
0
Helpful
2
Replies

Cisco 8945 - trying to load sip firmware

Michael Osland
Level 1
Level 1

I recently download cmterm-894x-sip.9-2-3-5.cop.sgn and installed it to our CCM version 7.1.5.33900-10.  After I rebooted, it still isn't showing the sip firmware.

Sip8945.png

What else do I need to know to be able to use the firmware?

2 Replies 2

Chris Deren
Hall of Fame
Hall of Fame

You may need to install the latest device pack for 7.1.5 to include the db change to support SIP 8945.

HTH,

Chris

Gajanan Pande
Cisco Employee
Cisco Employee

Mike,

8941/8945 IP Phone Enabler cmterm-894x-qed.9-2-2-0.cop.sgn should do the trick for you.

It can be downloaded from here http://www.cisco.com/cisco/software/release.html?mdfid=283095471&flowid=24542&softwareid=282074288&release=9.2(3)&relind=AVAILABLE&rellifecycle=&reltype=latest

Lemme know how it goes.

GP.