Cisco 8961 Support IPMA features

[tacl75]

Hi Guys,

Just to check if 8961 could support IPMA features like filtering of calls and enabling/disabling of "Call filtering"?

cheers,

Tony

[Joseph Martini]

It doesn't look like the 89XX or 99XX phones support IPMA from this doc:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsipma.html#wp1071963

[tacl75]

Oh dear. Is there any document beside the above which states clearly that IPMA is not supported by 89XX series?

[r.rung]

Hello Tacl,

when you install the following device pack, cucm Unified reporting:Unified CM Phone Feature List

tells you that from now on the 8961 and 9951 and 9971 are supportet for IPMA:

cmterm-devicepack9.1.2.11013-1.cop.sgn

Greetings