cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Blog-Cisco Community Wins Lithy 2018 Award

89
Views
10
Helpful
2
Replies
Highlighted
Beginner

Cisco ATA 190 Two Fax Numbers

Dears, 

 

I have one Cisco ATA 190 device connected on my HP printer and 

it's working fine .

now i'm trying to add ONE more FAX number to the same ATA 190

but it's not working !

 

is it possible to have 2 fax number working on one ATA 190 device or not ?

if yes kindly HOW ! 

 

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Cisco ATA 190 Two Fax Numbers

Hello,

 

If you are using CUCM then you may check the following link on "Configuring the ATA 190":

 

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190/a190_ag3conf.html

 

Please check the following:

 

Configuration

1. On the Cisco ATA 190 web page, go to Voice > Line 2 > Line Enable.

2. Choose yes to enable or no to disable.

3.

Click Submit. Wait for 40 seconds for the change to take effect.

 

Hope it helps,

G

 

 

Please rate, if useful

Beginner

Re: Cisco ATA 190 Two Fax Numbers

This is possible. What is the status of your 2nd port in Call Manager? Make sure it is registered first.

Note ATA 190 has two FXS ports, and each port has its MAC address. The first ATA 190 port uses the MAC address and the second ATA 190 port uses the shifted MAC address (example, AABBCCDDEEFF to BBCCDDEEFF01). You can add two devices from the Unified CM administration page.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190/a190_ag2str.html
2 REPLIES

Re: Cisco ATA 190 Two Fax Numbers

Hello,

 

If you are using CUCM then you may check the following link on "Configuring the ATA 190":

 

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190/a190_ag3conf.html

 

Please check the following:

 

Configuration

1. On the Cisco ATA 190 web page, go to Voice > Line 2 > Line Enable.

2. Choose yes to enable or no to disable.

3.

Click Submit. Wait for 40 seconds for the change to take effect.

 

Hope it helps,

G

 

 

Please rate, if useful

Beginner

Re: Cisco ATA 190 Two Fax Numbers

This is possible. What is the status of your 2nd port in Call Manager? Make sure it is registered first.

Note ATA 190 has two FXS ports, and each port has its MAC address. The first ATA 190 port uses the MAC address and the second ATA 190 port uses the shifted MAC address (example, AABBCCDDEEFF to BBCCDDEEFF01). You can add two devices from the Unified CM administration page.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190/a190_ag2str.html
CreatePlease to create content
Ask the Expert- DMVPN on Cisco routers