Cisco ATA186 and 7936 are compatible with CUCM 11.5?

[Yangjp715]

Hi All,

We have plan to upgrade our existing CUCM from 9.1 to 11.5. There are some cisco ATA 186 and 7936 in the company. Can these terminals be worked with CUCM 11.5 as native functionality? I checked they are not on the list in the device package, but their firmware are on the list in the readme, please see the link http://www.cisco.com/web/software/282074295/136664/cucm-readme-1151su2.pdf  ATA and 7936 both are supported. Is there anyone who can confirm this?

Thanks,

Eric

[Jaime Valencia · Accepted solution]

Yes, they can still be configured on CUCM 11.5, bear in mind that both endpoints are already past their last date of support, which means that despite the fact you can still configure them in CUCM, if something happens, and it's ruled that the issue is with the endpoint itself (HW or SW) there will be fix.

[Mohammed al Baqari · Accepted solution]

ATA186 and 7936 will work with cucm 11.5. We just completed the same and these were working after the upgrade