04-24-2010 06:08 AM - edited 03-15-2019 10:27 PM
Hi All,
I am integrating CME with CUCM by using gatekeeper. My Network tropology is
CME+PSTN Gateway (Router 3845)< ------------------> Gatekeeper + Gateway at CCM site (Router 2901) <...............> CCM 8.
Note: Please see the attachment.
I am very new to IPT. Could you please let me how I will do the configuration in Gatekeeper. Please let me know if any doc available..
Regards,
Nirmal
04-25-2010 09:20 PM
Nirmal,
Not sure if you have stumbled across this one yet:
To begin it's a very good one.
The part that may give you the most trouble is CUCM because it will not register the alias number. Rather you need to route based on tech prefix and zone prefix. You can check out this one as well.
http://voiplab.wordpress.com/2010/01/31/cucm-intercluster-trunk-gatekeeper-controlled/
04-26-2010 05:40 AM
Nirmal,
In this case the first step will be register the CME gateway and the CUCM to the gatekeeper with the proper prefixes for both devices, that is the key to get this configuration working in the proper way.
I strongly recommend you to get familiar with the gatekeeper technology and configuration before anything else.
These are very good documents that explains how the gatekeeper works and the configuration to register the gateway and the CUCM
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a00800c5e0d.shtml
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a008011221e.shtml
http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a0080094ac3.shtml
Understanding Cisco CallManager Trunk Types
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_0_1/ccmsys/a08trnk.html#wp1098346
HTH
Walter Solano
CCNA Voice
Cisco UCCX Specialist
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide