04-05-2017 12:52 AM - edited 03-17-2019 10:00 AM
hi ,
I have a call manager release 9 and I want to add the ipphones , I think the relase 9 is obsolete, what can i do ?
please i need a help, thank you,
Best regards
Solved! Go to Solution.
04-05-2017 01:01 AM
You can still add Phones to CUCM 9. As per below CUCM 9 is End Of Sale in 2015 but if you have support contract you will receive support till 2018. You can purchase the Upgrade to new version as required.
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/eos-eol-notice-c51-735216.html
Thanks
Haris
04-05-2017 01:02 AM
Hi,
Call manager 9 is still supported see EOS below.
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/eos-eol-notice-c51-735216.html
Table 1. End-of-Life Milestones and Dates for the Cisco Unified Communications Manager and Session Management Edition Software Version 9.x
Milestone |
Definition |
Date |
End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
June 30, 2015 |
End-of-Sale Date |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
December 29, 2015 |
Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
March 28, 2016 |
End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
March 31, 2017 |
End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
December 28, 2016 |
End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
March 26, 2018 |
Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
December 31, 2018 |
What phones model are you trying to register?
(Rate if it helps)
JB
04-05-2017 01:01 AM
You can still add Phones to CUCM 9. As per below CUCM 9 is End Of Sale in 2015 but if you have support contract you will receive support till 2018. You can purchase the Upgrade to new version as required.
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/eos-eol-notice-c51-735216.html
Thanks
Haris
04-05-2017 01:26 AM
thank you Haris and jitender
Best Regards
04-05-2017 01:45 AM
Happy to help
JB
04-05-2017 01:02 AM
Hi,
Call manager 9 is still supported see EOS below.
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/eos-eol-notice-c51-735216.html
Table 1. End-of-Life Milestones and Dates for the Cisco Unified Communications Manager and Session Management Edition Software Version 9.x
Milestone |
Definition |
Date |
End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
June 30, 2015 |
End-of-Sale Date |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
December 29, 2015 |
Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
March 28, 2016 |
End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
March 31, 2017 |
End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
December 28, 2016 |
End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
March 26, 2018 |
Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
December 31, 2018 |
What phones model are you trying to register?
(Rate if it helps)
JB
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide