01-18-2011 12:17 PM - edited 03-16-2019 02:56 AM
Hi Everybody!
i wish to know how to see and configure the log into CCM 5.1.3, i know its by RTM, but i cound´t find the info. I need know wich user made some change or tried to log in.
thanks.
01-18-2011 10:16 PM
Hi Eljose,
If Debug level tracing is enabled on Cisco Role-based Security, then you should be able to collect the Access Log through RTMT and collect what you're after.
Kind regards,
Craig
01-19-2011 04:51 AM
5.x doesn't have role based security logs, that's 7.X and above only. The only chance to get any info is to review the tomcat logs.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
01-20-2011 05:47 PM
Jaime,
Thanks for your input. Yes, the logs were certainly limited in CUCM 5.x. Hopefully the Access Logs I provided the link for above, in the Cisco Unified CallManager System Guide, Release 5.1(3), will be sufficient for the customer.
Craig
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide