cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
787
Views
0
Helpful
3
Replies

Cisco CME 8.6 have SIP trunks connected as IP Trusted list and have internal SIP devices

zeeshan iqbal
Level 1
Level 1

Cisco CME 8.6 have SIP trunks connected to provider server as IP Trusted list (not as register SIP trunks) and have internal SIP devices (Apple iphone and ipad) which require registration to this cme as local extensions. Office Telepony connection to the sip provider is fine as long as internal SIP devices are not connected. As they got connected to CME, Office Telepony stops working dialing out and incoming calls from sip provider and internal SIP devices also behaves strangly( no loal calls or no inbound).

what special configuration is required to achieve this task and which translation profiles and dial-peers will be used by these sip extensions? will thwy use the same dial peers and translations as sccp extentions do?

############ CONFIGURATION #############

voice service voip

gcid

allow-connections h323 to h323

allow-connections h323 to sip

allow-connections sip to h323

allow-connections sip to sip

no supplementary-service sip moved-temporarily

redirect ip2ip

sip

  registrar server

voice class custom-cptone jointone

dualtone conference

  frequency 600 900

  cadence 300 150 300 100 300 50

!

voice class custom-cptone leavetone

dualtone conference

  frequency 600 900

  cadence 50 300 100 300 150 300

!

!

voice register global

mode cme

source-address 192.168.1.1 port 5060

max-dn 10

max-pool 10

load 9971 sip9971.9-2-4-19

hold-alert

tftp-path flash:

create profile sync 0381086251518028

!

voice register dn  1

number 401

name daivd SIP

label 401

!

voice register pool  1

id mac 1ED6.E780.94CF

number 1 dn 1

dtmf-relay rtp-nte

username david password 4321

codec g711ulaw

no vad

!

sip-ua

retry invite 2

retry response 3

retry register 10

timers connect 100

sip-server ipv4:192.168.1.1

!

!

telephony-service

sdspfarm units 3

no auto-reg-ephone

max-ephones 42

max-dn 50

ip source-address 192.168.1.1 port 2000

ip qos dscp af11 media

ip qos dscp cs2 signal

ip qos dscp af43 video

ip qos dscp 25 service

!

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

One would need to look at traces to understand what happens.

Generally speaking, these advanced configuration are better taken by a reputable consultanto, or UC certified Cisco Partner.You may loose a lot of time ang gain frsutration if attempting to do yourself.

Hi Paolo,

Thank you for your reply.

traces are really horrible. once one of my first voip dial-Peer changed itself in the configuration with the DESTINATION-PATTERN of internal sip private ip addresss:PORT 5062

This gave me hint that i should change the command

source-address 192.168.1.1 port 5060 TO PORT 5062? ANY COMMENTS ?

THANK YOU

For sure you should not.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: