cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
282
Views
0
Helpful
2
Replies

Cisco CME and Avaya Office inter call routing

syed kazim abbas
Participant
Participant

Hello experts,

we have CME 10.0 running cisco phones and the other site have Avaya office and server running Avaya phones , how can I route call between them.

Best Regards,

Kazim Abbas

2 Replies 2

Adarsh Chauhan
Participant
Participant

Hi,

You will have to get some kind of IP connectivity between two site and then make a dial-peer on CME pointing to the IP of the Avaya Server.

Example. 

dial-peer voice 1 voip

destination-pattern <avaya extension generic pattern>

session protocol sipv2

session target ipv4:<IP of the Avaya server>

dtmf-relay rtp-nte sip-notify <DTMF capabilities>

voice-class codec 1

Please rate and mark correct if helpful

Regards,

Adarsh Chauhan


Please rate and mark correct if helpful
Regards,
Adarsh Chauhan

Hi Adarsh,

thanks for your help. I tried the above as you mentioned but connection refused by avaya. I am using codec G711alaw. but ip reach-ability end to end is ok.

regards,

Kazim Abbas

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: