Cisco CME FXO issue with outgoing calls

[Hilal Computers]

Hi all,

I'm having couple of issues with the analog trunks.

1. Calls getting disconnected after one ring when we dial outside ( This is happening only intermittently)

2. Although customer has six analog lines, they coudn't dial outside after 2nd call (simultaneously)

voice-port 0/0/2

translation-profile incoming CALLER_ID_TRANSLATION_PROFILE

translation-profile outgoing OUTGOING_TRANSLATION_PROFILE

no battery-reversal

    no vad

cptone AE

connection plar opx 114

caller-id enable

Any suggestions please?

[paolo bevilacqua]

You should take "debug vpm signal" for a failed call.

You need to place voice-port in trunk group and use trunk group in dial peer to use all the ports.