cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1505
Views
4
Helpful
3
Replies

Cisco CME: Reserve an outgoing FXO port for a group of internal extension?

Nhan Ho
Level 1
Level 1

Hi Experts,

I just came across a situation where a client required that a particular PSTN line (that is connecting to FXO 0 on a CME, for example) is reserved for outgoing calls for a small group of internal extensions (let's say it's 8010 to 8019). I did some research but could not find anything relevant.

Could anyone please help me by showing me whether it's possible to do with a Cisco CME? If so, what is the feature called?

Thank you very much in advanced for your time and for sharing your wisdom.

Regards,
Nhan.

1 Accepted Solution

Accepted Solutions

Tagir Temirgaliyev
Spotlight
Spotlight

Hi

You'll need cor list like this

dial-peer cor custom

name pt-internal

name pr-external


dial-peer cor list css-internal

member pt-internal


dial-peer cor list css-external

member pt-external


dial-peer voice 9 pots

destination-pattern 9[2-9]......

corlist out css-external

...

ephone-dn 1

number 8010

corlist incoming css-internal

ephone-dn 2

number 8019

corlist incoming css-internal

dont forget to rate post

View solution in original post

3 Replies 3

Tagir Temirgaliyev
Spotlight
Spotlight

Hi

You'll need cor list like this

dial-peer cor custom

name pt-internal

name pr-external


dial-peer cor list css-internal

member pt-internal


dial-peer cor list css-external

member pt-external


dial-peer voice 9 pots

destination-pattern 9[2-9]......

corlist out css-external

...

ephone-dn 1

number 8010

corlist incoming css-internal

ephone-dn 2

number 8019

corlist incoming css-internal

dont forget to rate post

nanosynth
Level 1
Level 1

Here, this is a little easier to understand. I have it setup so that extension 2001 will always use FXO port 2/1 for outgoing calls and extension 2002 will always use FXO port 2/0 for outgoing calls.

dial-peer cor custom
name port100
name port200
!
!
dial-peer cor list use100
member port100
!
dial-peer cor list use200
member port200
!

dial-peer voice 100 pots
corlist outgoing use100
description 10 Digit Dialing
destination-pattern 9[2-9]..[2-9]......
port 2/1
forward-digits 10
!
dial-peer voice 101 pots
corlist outgoing use100
description Long Distance Dialing
destination-pattern 91..........
port 2/1
forward-digits 11
!
dial-peer voice 201 pots
corlist outgoing use200
description 10 Digit Dialing
destination-pattern 9[2-9]..[2-9]......
port 2/0
forward-digits 10
!
dial-peer voice 202 pots
corlist outgoing use200
description Long Distance Dialing
destination-pattern 91..........
port 2/0
forward-digits 11
!
dial-peer voice 10 voip
corlist incoming use100
answer-address 2001
!
dial-peer voice 20 voip
corlist incoming use200
answer-address 2002

ephone-dn 1
number 2001

pickup-group 5000

name PHONE-3
call-forward busy 3000
call-forward noan 3000 timeout 20
corlist incoming use100
!
!
ephone-dn 2
number 2002
pickup-group 5000
name PHONE-4
call-forward busy 3000
call-forward noan 3000 timeout 20
corlist incoming use200
!

Thank you very much for your time, ttemirgaliyev and nanosynth, both of you have helped me meet the customer's requirements and discover another usage of COR list.