Cisco CME Teleco hibride analog line ( FAX , Telephone)
I will configure a CME for new End customer that a specific Existing analog Line ( will be used in FXO).
This specific Teleco line is used for both Fax and Telephone ( Fax machine have also a telephone). Now , we will use an Ip Telephony, we have a question that how that line will be configured on the CME for :
1- If the coming call on this is line is a telephony call , the call will be routed to an ipphone .
2- If the coming call on this is line is a FAX , the call will be routed to a FAX Machine.
The Line will be connected to the CME , by usiing FXO Card. and also we can add a FXS card to the CME.
The 2020 IT Blog Awards, hosted by Cisco, is now open for submissions through October 16. Submit your blog, vlog or podcast today. For more information, including category details, the process, past winners and FAQs, check out: https:...
We have CUCM and CUC (v12.5) which has been directly registered to Cisco's Smart Licensing, but today's I noticed this error from RTMT "Smart Licensing Authorization Renewal Failure". I tried to force the re-authroization and re-registration and now it sa...
Hello I have a Cisco 7841 3pcc Phone, if I specify a custom ringtone and try to play it, it is spit out in the log> Bad parameter in Ring File field: w = tftp: //192.168.220.120/TEST.rawand the standard sound plays.-----------4047 ERR Jan 17 16: 15: 33...