Cisco CUPS 7.0.6 and SIP phone 8961

[Dwayne Whitehead]

Hello,

Is it possible for ip phone 8961 SIP to run with CUPs 7.0.6 and CUCM version 7.1.5?

I have had a look at some documentation that only provides SCCP protocol phones and the 8961 ip phone isnt in the list? (See below)

http://docwiki.cisco.com/wiki/Cisco_Unified_Presence,_Release_7.x_--_Cisco_IP_Phones_Compatibility

Thanks

[ronpatel · Accepted solution]

Hi

8961 is not supported with CUPC 7.0

Also it is supported in CUPS 8.X for IPPM not in SCCP or not in SIP.

But it is supported for  MOC Remote Call Contro and  Notify Presence Support SIP and SCCP

http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_0/english/compatibility/cupcompatibility8x.html

Regards

Ronak patel

Rate helpful posts.

[Dwayne Whitehead]

Hi Ronak,

We dont use CUPC, we use Microsoft Lync for MOC Remote Call control with CUPS version 7.0.6.

Does this make a difference? As you have not mentioned that its not supported for this functionality with the 8961 ip phone?

Thanks

Dwayne

[ronpatel]

Hi Dwayne,

Sorry I did noy got your new query. But 8961 with CUPS 7.0 will not work for MOC RCC also.

Regards

Ronak patel

Rate all helpful posts.