cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

2560
Views
0
Helpful
11
Replies
Highlighted
Beginner

Cisco IOS Homogeneous Video Conference Bridge

HI,

I have to configure video conference with :

-CISCO Router 2911

-pvdm3-16

-Cucm version 10

-unity connection

-21 ip phone 8945

 so i have looked for a solution to do a video conference without the server telepresence:

i have applied the following solution:

/////////////////////////////////////////////// 2911

Voice card 0

Dsp service dspfarm

 

///////////////////////////////

 

Dspfarm profile 1 conference

Codec g711alaw

Maximum session

Associate application sccp

No shut

 

//////////////////////////////////////

 

Sccp localo loopback 0

Sccp ccm 192.168.1.101 Identifier 1 priorty 1 version 7.0+

SCCP

//////////////////////////////////////////

sccp ccm groupe 1

Bind interface loopback 0

associate ccm 1 priority 1

Associate profile 1 Register cfbrouter

 

////////////////////////////////////**Configuration cucm serveur

 

Media resource --->conference bridge

conference bridge name ---> cfbrouter

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Create Meet-Me Number/Pattern

Call Routing > Meet-Me Number/Pattern

2000

Device > Device Settings > Common Device Configuration

COMMDEV

Cisco Unified Serviceability

Turn on Cisco IP Voice Media Streaming App

 

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

The video conf still not working, can i get some help to troubleshoot this issue;

Thanks.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Participant

As Jaime said, you need a

As Jaime said, you need a video  CFB. The video CFB goes something like this:

voice-card 0
voice-service reservation X 
dspfarm
dsp services dspf

dspf pro 1 con vid homo
codec g711u
codec h264 cif frame-rate X bitrate X
m s 4
a a s
no shut

I copied this from one of my production routers, please do not copy paste unless you fully understand every line and the effect this will have on your network.

Thanks,

FG

View solution in original post

Highlighted
Hall of Fame Cisco Employee

That you configured a voice

That you configured a voice CFB, not a video CFB, all you get from what you configured, is voice conferences.

Actually nevermind, you need a another video CFB, this has been deprecated, PVDM3s are no longer supported for video on ISR G2

http://www.cisco.com/c/en/us/products/collateral/unified-communications/tdm-gateways/bulletin-c25-735945.html

That's probably the reason why I couldn't find any references for config.

HTH

java

if this helps, please rate

View solution in original post

11 REPLIES 11
Highlighted
Hall of Fame Cisco Employee

Because you configured a

Because you configured a voice CFB, not a video CFB.

HTH

java

if this helps, please rate
Highlighted
Beginner

OK end ??

OK end ??

Highlighted
Hall of Fame Cisco Employee

That you configured a voice

That you configured a voice CFB, not a video CFB, all you get from what you configured, is voice conferences.

Actually nevermind, you need a another video CFB, this has been deprecated, PVDM3s are no longer supported for video on ISR G2

http://www.cisco.com/c/en/us/products/collateral/unified-communications/tdm-gateways/bulletin-c25-735945.html

That's probably the reason why I couldn't find any references for config.

HTH

java

if this helps, please rate

View solution in original post

Highlighted
Enthusiast

Hi Jaime

Hi Jaime

Which CFB do you recommended i can see pvdm3-128 should be support video CFB am i right ?

But you say pvdm3 no longer supported video CFB

Whicg pvdm or product supported by cisco can you please provide me info ?

Thanks

Highlighted
Hall of Fame Cisco Employee

It WAS supported for video,

It WAS supported for video, not anymore.

You cannot do anything with PVDMs, you need a vTP or an MCU for video conferences (There's a whole doc on video preferred architecture on cisco.com you might want to review). No way around that, you might still find references for the config and do it, but you'll have absolutely no support from Cisco with anything regarding using the PVDM3 as a video CFB.

HTH

java

if this helps, please rate
Highlighted
Enthusiast

Thanks Jaime for explanaition

Thanks Jaime for explanaition.

Is ıt works with previous ios 15.5.3

Highlighted

Hi Jaime,

Hi Jaime,

hope this finds you good,

could you please provide any link or document says that i can't anymore use the PVDM as video conference resource, i have DX80 will register on CUCM 11 and customer asks to use the PVDM?

also if you please tell is there any recommended steps or configuration to make DX80 register on CUCM?

Highlighted
Hall of Fame Cisco Employee

I already posted the link in

I already posted the link in a previous response...

About the DX80, just choose the right device type on CUCM, depending on what the device has, either Android or CE, the rest of the configuration is the same as any other device.

HTH

java

if this helps, please rate
Highlighted

Thanks Jaime

Thanks Jaime

Highlighted
Beginner

Now i have dx80 with ce

Now i have dx80 with ce software when i add on cucm 11 there is no ce or andriod 

And in the divce defaults there is no load id for dx80 or dx70 it only found for dx650

Now can i add dx80 as ce is it ok 

And what i miss if i regestir it as ce not andorid

Highlighted
Participant

As Jaime said, you need a

As Jaime said, you need a video  CFB. The video CFB goes something like this:

voice-card 0
voice-service reservation X 
dspfarm
dsp services dspf

dspf pro 1 con vid homo
codec g711u
codec h264 cif frame-rate X bitrate X
m s 4
a a s
no shut

I copied this from one of my production routers, please do not copy paste unless you fully understand every line and the effect this will have on your network.

Thanks,

FG

View solution in original post

CreatePlease to create content
Content for Community-Ad
Future of Work Virtual Summit Day 5

Cisco COVID-19 Survey