cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
874
Views
10
Helpful
4
Replies
Highlighted
Beginner

Cisco IP Communicator

Hello,

Is it possible to have an Expansion Module on an CIPC phone?

CUCM Version 10.5.

Thanks

Ernie

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

@grame0001,

grame0001,

Alas, this has not been created. What do you need to achieve?
Kind regards,
Luke


Please rate helpful posts and mark correct answers.

View solution in original post

4 REPLIES 4
Highlighted
Beginner

@grame0001,

grame0001,

Alas, this has not been created. What do you need to achieve?
Kind regards,
Luke


Please rate helpful posts and mark correct answers.

View solution in original post

Highlighted
Beginner

Thanks for the response.  I

Thanks for the response.  I had a secretary who wanted to duplicate her 7965 that had about 15 extensions on it. I could only fit 8.

Ernie

Highlighted
Beginner

@grame0001,

grame0001,
I see. If other people need to answer these extensions as well as her, then you could achieve a similar setup/workaround with some hunt lists in a broadcast configuration.
If no one else but herself needs to answer to the extensions then a CFWD on those extensions to her own extension will do the trick.
Just a thought. HTH.
Kind regards,
Luke

Please rate helpful posts and mark correct answers.
Highlighted
Beginner

Thanks Luke,

Thanks Luke,

I will see if your recommendations will work.

Ernie