Cisco IP Phone 7811 unprovisioned

[Ahmed habib]

I added the 7811 IP Phone to CME 11.5 and it took an IP but still say unprovisioned 

Here is the configuration 

[R0g22 · Accepted solution]

Add the following -

voice register pool 1
num 1 dn 1

voice register global
create profile

[Ahmed habib]

OK, The phone become registered but these errors are showed in debug 

What is the meaning ?

cisco#debug ccsip err
cisco#debug ccsip error
SIP Call error tracing is enabled
cisco#
*Mar 6 07:37:27.987: //-1/0E0711568035/SIP/Error/sipSPIFlushDeferredQueue:
Invalid deferredQueue
*Mar 6 07:37:28.011: //-1/0E0ABCE48036/SIP/Error/sipSPIFlushDeferredQueue:
Invalid deferredQueue
*Mar 6 07:37:28.151: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table:
No entry found in sipCallID Table
*Mar 6 07:37:28.151: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr:
ReqLine IP addr does not match with host IP addr
*Mar 6 07:37:28.155: VOICE REGISTER POOL-1 has registered. Name:SEP00279024A9E7 IP:192.168.70.2 DeviceType:Phone

*Mar 6 07:37:28.155: %SIPPHONE-6-REGISTER: VOICE REGISTER POOL-1 has registered. Name:SEP00279024A9E7 IP:192.168.70.2 DeviceType:Phone

*Mar 6 07:37:28.155: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_locate_in_pattern_table:
***No entry found in Destination pattern Table
*Mar 6 07:37:28.155: //-1/xxxxxxxxxxxx/SIP/Error/sipSPIGetDialogParamStr:
Invalid parameters
*Mar 6 07:37:29.135: //-1/xxxxxxxxxxxx/SIP/Error/sipSPILocateSubscribeDialogSCB:
Could not find scb for response
*Mar 6 07:38:00.159: //1/0E10D7A58037/SIP/Error/sipSPIFlushDeferredQueue:
Invalid deferredQueue

[R0g22]

You can ignore those. Not everything you see in the logs is relevant. It would be difficult to explain every line in that log, here at least.

[fisher_radionav]

I had to replace 7911 with 7811 series recenlty.

MAC address has been changed to new one and all configuration seems to be ok but phone stays unprovisioned.

I have call manager configured on old 3845-K9 - It's been done many years ago.I've found config xml's for 79 series but nothing for 78...

Could You suggest anything?

Many thanks,

[Ahmed habib]

@fisher_radionavYou hav to check IF CME Version support 7811 Type or not first

[Mohammed al Baqari]

You can't configure 78xx phones on 38xx CMEs. 38xx can't run the required
IOS

**** please remember to rate useful posts

[fisher_radionav]

Thank You kindly for quick response and support!

Regards,