cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
691
Views
3
Helpful
30
Replies

Hello allCarlo thanks for all

Hello all
Carlo thanks for all the posts, the problem almost solved.

After change int fa1/7, switchport trunk native vlan 20 to 10 and switchport access vlan 10 to 20.
It is almost done, iphone is working, I have Background Images but ONLY default Ring, ring list unavailable.
Also router CME send mesage from time to time, I do not know what this mesage mean. Can some one help me to resolve this issue.
Thanks

mesage from router:

CME_c7200#
CME_c7200#
May 1 13:51:22.943: %IP-3-LOOPPAK: Looping packet detected and dropped -
src=192.168.15.10, dst=192.168.16.2, hl=20, tl=78, prot=17, sport=137, dport=137
in=FastEthernet1/0.20, nexthop=192.168.16.2, out=FastEthernet1/0.20
options=none -Process= "IP Input", ipl= 0, pid= 82, -Traceback= 0x61BA3054z 0x61BA32D8z 0x61BA4464z 0x61BA5374z 0x61BA57A0z 0x61BA5B44z 0x61E556B0z 0x61E557E4z 0x61E56F7Cz 0x61B8DEE8z 0x61B8F850z 0x61B8FC64z 0x61B8FD1Cz 0x61B8FF64z 0x62CBAD24z 0x62CBAD08z
CME_c7200#
CME_c7200#

Thanks for help

Robert

Hi Robert,

Hi Robert,

glad that you solved your issue.

For other issue, remove ip helper-address command from interface fastethernet1/0.10

Because the helper address is the same router, you don't need to define it.

HTH

Regards

Carlo

 

Please rate all helpful posts "The more you help the more you learn"

Hi Carlo

Hi Carlo

thanks for the hint
still ONLY default Ring, ring list unavailable. :-/

Hi Robert,

Hi Robert,

Can take a screenshot of status messages of your IPC?

Going on settings-->Status--->Status Messages

Thanks

Regards

Carlo

Please rate all helpful posts "The more you help the more you learn"

Hello Carlofile in

Hello Carlo
file in Attachment
thanks

Highlighted

Hello

Hello

Problem solved with the ring lists

Steps should be taken:
from the directory disk0: /ringtones/Analog1.raw


All files moved to the
disk0: Analog1.raw

then on router type the command for each file separately
for example,

tftp-server disk0: Analog1.raw

restart ephone and is done

Robert

Hello Carlo

Hello Carlo

Sorry I'm so intrusive,
some suggestion to this output

MAC address typed manually

CME_c7200#
CME_c7200#sh ephone

ephone-1[0] Mac:0200.4C4F.4F50 TCP socket:[-1] activeLine:0 whisperLine:0 UNREGISTERED
mediaActive:0 whisper_mediaActive:0 startMedia:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:0
IP:0.0.0.0 0 Unknown 0 keepalive 0 max_line 0 available_line 0
Preferred Codec: g711ulaw

CME_c7200#

Vlan Voice natwork 192.168.15.0
Vlan Data network 192.168.16.0

TFTP IP address is only 192.168.16.6

Robert

No worries Robert.

No worries Robert.

Sorry for my delay on answering you.

Can you please attach what follows:

A screenshot of your ipc network config

A show run of your cme

The output of a debug ephone detail (while trying to register the IPC)

Thanks

Regards

Carlo

Please rate all helpful posts "The more you help the more you learn"

Hello Carlofiles are enclosed

Hello Carlo
files are enclosed in the Attachment
thanks

Robert,

Robert,

Thanks for the output.

As screenshot I mean the IPC network parameters on windows machine.

Cay you please  capture it for me an post ?

Thanks

Cheers

Carlo

Please rate all helpful posts "The more you help the more you learn"

This is a windows

This is a windows machine, GNS3
Carlo, what do you mean capture it for me an post ?

Robert

Robert,

Robert,

Open ip communicator right click and select parameters  

Select Network tab

Take a screenshot an attach it here

Thanks 

Carlo

Please rate all helpful posts "The more you help the more you learn"

files are in Attachmentthanks

files are in Attachment
thanks

Hi Robert,

Hi Robert,

On first tftp put 192.168.16.2 not .6

Please let me know 

Cheers

Carlo

Please rate all helpful posts "The more you help the more you learn"

Hi Carlo

Hi Carlo

it was

1tftp 192.168.15.6

2tftp 192.168.15.1

changed

1tftp 192.168.16.2

2tftp 192.168.15.2

CIPC did not work, the command debug ephone detail showed nothing

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards