Cisco ip phone "how to change language"

[shaikh ibrahim]

    Hi .              

Ineed to install Arabic Language in the phones.Any help will be higly appreciated.

[nikshah]

Callmanager version that you are currently running if you can let us know that would be helpful to point you in the correct direction.

BTW for languages you need to isntall locales

[Mohammed al Baqari]

For Arabic language you need to use custom locals. Its not predefined system local by Cisco. I wrote a blog on how to change language but didn't include Arabic lanugage. I am sharing the link incase it can help.

http://x-ccie.blogspot.com/2012/04/cme-localization-support.html

Please rate the post if you find it helpful.

[shaikh ibrahim]

Callmanager ver 8.6!

[Chris Deren]

You can download it here:

http://www.cisco.com/cisco/software/release.html?mdfid=283782839&flowid=26422&softwareid=282074333&release=8.6%282.1000-1%29&relind=AVAILABLE&rellifecycle=&reltype=latest

Several country specific Arabic locales are available.

HTH,

Chris

[Rob Huffman]

Hi Shaikh,

Here's the path to find the locale;

Downloads Home

Products

Voice and Unified Communications

IP Telephony

Unified Communications Platform

Cisco Unified Communications Manager (CallManager)

Cisco Unified Communications Manager Version 8.6

Unified Communications Manager/CallManager Locale Installer-8.6(2.1000-1)

or if you are @ CUCM 8.6(1)

Downloads Home

Products

Voice and Unified Communications

IP Telephony

Unified Communications Platform

Cisco Unified Communications Manager (CallManager)

Cisco Unified Communications Manager Version 8.6

Unified Communications Manager/CallManager Locale Installer-8.6(1.1000-1)

The install process is shown here;

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/8_6_1/cucos/iptpch7.html

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

[shaikh ibrahim]

Thankyou every one! .. what is the procedure if i want to use it for voicemail ..i have cisco unity connection 8.6 as well ?

[Jaime Valencia]

Adding or Removing Cisco Unity Connection  8.x Languages

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrug027.html

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[Chris Deren]

Keep in mind that with Unity Connection you need to put exact compatible version of locale, where is CUCM the locale is compatible with multiple CUCM versions, for UCON they usualy work only one one specific version and each ES/SU/etc requires different locale files, and some versions may not have any locales available.

So, make sure you read the ReadMe files before you apply them.

Chris

[Rob Huffman]

Hi Shaikh,

There are different 8.6.2 locales depending on the exact version

of Unity Connection you are running;

Installing Additional Cisco Unity Connection Languages

#

Revised April 25, 2012

---

#

Note•All  locales other than ENU are released for Connection 8.6(2) Engineering  Special 12. Connection 8.6(2) ES 12 locales are supported only with  Connection 8.6(2) ES 12.

#

•All  locales other than ENU are released for Connection 8.6(2) SU 1 (ES 25).  For more information on the supported engineering-special versions with  these locales, please contact Cisco Technical Assistance Center (TAC).

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/release/notes/862cucrn.html#wp1300703

If you are running Unity Connection 8.6(1) here are the related notes;

Installing Additional Cisco Unity Connection Languages

Revised March 06, 2012

---

Note Connection  8.6 versions of languages other than ENU are released. The Connection  server must be running a minimum of 8.6(1)ES2 to use these languages.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/release/notes/861cucrn.html#wp1300703

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen