Cisco IP Phones Still Connected After FXO Go On-Hook

[Mohammed Alkiswani]

Hi All,

we have Cisco 2801 VGW with 2 analog lines connected to it (FXO Card), and it is confiugred as H323 to CUCM 8.5, and we have aproblem that when the PSTN caller hangup, the FXO go On-Hook, but the phone still in connected state for 30 seconds, and this case happened also when i shudown the FXO port while it on active call.

[Hermanus Janse van Vuuren]

Have a look at the following document

http://www.cisco.com/warp/public/788/signalling/fxo_disconnect.html



Sent from Cisco Technical Support iPad App

[Mohammed Alkiswani]

My problem not on the FXO, my problem on the CUCM and IP Phones, that the phone still connected after the FXO return to On-Hook for 30 Seconds.

for example if i shutdown the FXO will it in active call the IP Phone will still in the connected state for 30 seconds, and the user hear a tone at this period.