06-04-2012 07:08 AM - edited 03-16-2019 11:29 AM
We have CUPS 8.6.3.10000 and CUCM 8.6 is on production.
Configured Cisco Jabber 9.0.1 for windows and able to login to Jabber.
Integrated with LDAP, CTI Gw, CCMIP, CFS all are created.
Problem I am facing in Jabber is for any user under communication i can see only "Chat"
I cant call or I cant make any video call.
I have configured Jabber same as how we configure CUPC
Pls. suggest
06-04-2012 09:00 AM
Hi
I dont get video option in Jabber.
I believe, File>Option and Video, I dont get this option.
Any one aware how to make video call through jabber?
One Jabber client if with VT Advt. and other Jabber client with 9971 Phone.
Want to establish video call through jabber.
I dont see any option avaible in Jabber while selecting that user whose phone has already video capable.
Rgds
Rajesh
06-04-2012 09:14 AM
In the Jabber client, go to File-->Options-->Phone Accounts. Is the Username Password populated under "Phone Services"?
06-04-2012 01:20 PM
Hi
I have entered user/pass under
go to File-->Options-->Phone Accounts
I got video option, after I choose "Use my computer for Calls"
I have users listed in my contact list. In CUPC roght click contact we can call.
But in Jabber, can we call by right click contact? I am getting only "Chat" option.
Also on top menu, under "Communcation" I see only "Chat" option available.
Rgds
Rajesh
08-07-2012 08:44 AM
Hi All
I have exactly the same issue with CUPS 8.6.3, CUCM 8.6.2 and Jabber 9.0.3, works fine in CUPC 8.6.1 but I dont get the Call option when I right click on a contact.
Any idea?
Regards
Nick
09-04-2012 09:13 AM
Hello All,
I am having the exact same issue. When we used CUPC, we were able to call other CUPC users by right-clicking their name. However, in Jabber, we can only chat. "Call" is no longer an option. One thing I did notice is that everyones profile doesn't have their phone number or extension listed. Could this be the issue? If so, how do I get their extension to attach to their profile? I have tried looking through all the options on the Administrator web console, but have had no luck. Any suggestions will be greatly appreciated.
Thanks,
Adam
09-04-2012 09:59 AM
Do you have the directory working, if you do have it working with either EDI or UDS and you add the contacts is CUPC and now you have logged into Jabber try deleting the contacts and re adding them to the client.
If your directory is not working then you must get this working before the Call option will appear, Jabber will use EDI by default so depending on your requirements you may need to change to UDS to get this to work.
Regards
Nick
09-04-2012 10:43 AM
Thank you for the reply Nick. However, I can't find where you are talking about in the Administration Console. Right now everything is integrated with LDAP, which has everyone's extension tied to their account. Is this what you are referring to? I can't find anything about EDI or UDS. Also, I tried deleting and readding them on my client, but it didn't help. The "Call" feature is totally unavailable. It's not even greyed out. It just doesn't show up at all.
09-04-2012 10:47 AM
09-04-2012 11:52 AM
Thank you for the information. It got me going in the direction I needed to be going. Although, I think I've found my problem. I said earlier that users profiles don't list their extensions that are tied to their accounts in LDAP. However, that isn't entirely true, and I do apologize.
I just realized that some users profiles do have their phone numbers. It's just pulling from the wrong field in LDAP. So, I found where to change it (CUP Admin>Application>CUPC>Settings). In there I changed the "PrimaryPhoneNumber" to pull from the "ipPhone" field in LDAP instead of pulling from "telephoneNumber". I went back into the CUCM Admin console and synced everything, but it's still listing the old phone number. I deleted and readded the contact, but no luck. Does it just take a while to sync, or am I way off track here?
Again, thanks for all of the help.
-Adam
09-04-2012 01:28 PM
Looks like if I just put their extension in that field in LDAP, it displays in their profile in Jabber and the call feature works. Not really ideal, as I want it to pull from the field I specify, but you can't have your cake and eat it to I guess.
09-18-2012 05:42 AM
jabber-config.xml file required to be uploaded into CUPS.
This will resolve the issue.
Rgds
Rajesh Kumar
06-05-2013 06:49 AM
Where to upload? Please explain.
06-05-2013 07:57 AM
To the TFTP, if you review the J4W configuration guide, it's all explained there.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
06-06-2013 05:00 AM
rajesh.kumar wrote:
jabber-config.xml file required to be uploaded into CUPS.
This will resolve the issue.
I think, you have to upload the file into the CUCM´s TFTP. Because CUPS havn´t an TFTP-Server. This was the solution for me! Maybe also for others. Wireshark dont lie ;-)
A very good tool to create an jabber-config.xml file is https://supportforums.cisco.com/docs/DOC-25778
Thx for reply
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide