cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
104
Views
0
Helpful
4
Replies
Highlighted
Beginner

Cisco MediaSense with c7940 ip phone

Dear Sir,

I have CUCM and  cisco mediasense server 11.x. I am using a lot of Cisco 7940 IP phones in our network and try to record the cisco IP phone 7940 phone calls. But I am not able to record the 7940 ip phone in mediasense server because C7940 don't have the Build-in-bridge features. Is there the solution to record 7940 ip phone calls in mediasense. Could you please advise.
Thank you.

Best Regards,

Vector

Is it possible to use "SPAN-based Solution" in mediasense...

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab09/clb09/recordng.html

4 REPLIES 4
Highlighted
Cisco Employee

Hi Vector,

Yes, SPAN based recording solution would work, one of the main considerations being the bandwidth utilization.

You can also use Network based recording on CUBE but it works for SIP-SIP calls only details here

http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube_proto/configuration/15-mt/cube-proto-15-mt-book/voi-ntwk-based.html

HTH

Manish

Highlighted

Hi 

Will the CUBE based recording work for Internal IP Phone to IP Phone Calls ?

Or Does it need the call to be passed via SIP Trunk ?

Thanks

Haris

Highlighted

Hi Haris,

WIth Gateway Preferred Network based recording enabled and BiB disabled on the phone the internal calls should not be recorded.

Manish

Highlighted

Hi Manish,

Thank you for your reply, but we are trying to record internal calls(C7940 IP phones)  in Mediasense Sever. Apart from CUBE based recording ,is there any other solution for it.

Best Regards,

Vector

Content for Community-Ad