cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
658
Views
0
Helpful
2
Replies

Cisco Phone 8865 External Calls Issue

Mahmoud.Fawzy
Level 1
Level 1

Hello Team,

I have a problem with the phone model Cisco 8865 and here is the data:

- Phones can only call internally.

- when trying to call externally [ Mobile number, International, etc... ] call drops with an error code:

" Cause 38 Network Out of order "

- We have another phone model in the company Cisco 7821 which has same everything [ configuration, gateway, etc...] and It's working perfectly.

- ISP confirmed that there is not issue from their side.

Thank you in advance.

1 Accepted Solution

Accepted Solutions

Since it happens only with video end point, and working on normal phone

Try this command under voice port  "bearer-cap speech

 

 



Response Signature


View solution in original post

2 Replies 2

Since it happens only with video end point, and working on normal phone

Try this command under voice port  "bearer-cap speech

 

 



Response Signature


engmouafy
Level 1
Level 1

Disable video from the phone page , try again - if it worked fine, you will need to add a new device pool for the sip/h323 trunk then create a new region for the new device pool and disable the video between the site region and trunk region

 

Site-region—> site device pool, siptrk-region—> sip trunk device pool then disable video between the regions

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: