is there a way to save the user/password during VPN authentication process?
We are running CUCM 9.1.2 + ASA for register 2 IP Phone. The problem is that when the phones got unregister because some electrical or internet issue at the remote site someone has to write user/pass again, for End User is not a easy task.
Any help would be appreciated.
__________________________________________________ Please remember to rate useful posts clicking on the stars below. LinkedIn Profile: do.linkedin.com/in/leosalcie
Note: Cisco recommends that you use MICs for LSC installation only. Cisco supports LSCs to authenticate the TLS connection with CUCM. Because MIC root certificates can be compromised, customers who configure phones to use MICs for TLS authentication or for any other purpose do so at their own risk. Cisco assumes no liability if MICs are compromised.