Hi Omni,
Easy to answer my friend. This phones are SIP you will need configure the (voice register global) and (voice register pool 1) to register them. Note that in voice register pool in the first line ( id network) is your local voice network. The secound line will be CUCM address . when this address is reachable again, the phones back to register on CUCM.
config term
!
!
voice register global
timeouts interdigit 2
system message SRST-MIAMI
max-dn 4
max-pool 4
!
voice register dn 1
number 4310
!
voice register dn 2
number 4311
!
voice register dn 3
number 4312
!
voice register dn 2
number 4313
!
voice register pool 1
id network 10.4.10.0 mask 255.255.255.0
proxy 10.10.10.6 preference 1 monitor probe icmp-ping
dtmf-relay rtp-nte
voice-class codec 1
call-forward b2bua busy 80000
call-forward b2bua noan 80000
!
!The Callmanager fallback will used only for your skinny phones. So try to added correct number of DN and PHONES !and remmember that the license of SRST will deduct the amount of phones that you declare as sip and skinny.
!
call-manager-fallback
video
maximum bit-rate 2048
secondary-dialtone 0
max-conferences 8 gain -6
transfer-system full-consult
user-locale PT
timeouts interdigit 3
ip source-address 10.4.10.1 port 2000
max-ephones 236 ---------------------------> 236 skinny + 4 SIP phones = 240 phones in SRST
max-dn 236 dual-line
system message primary SRST MIAMI
system message secondary SRST
transfer-pattern ....
voicemail 80000
call-forward pattern ....
moh "flash:music-on-hold.au"
multicast moh 239.1.1.1 port 2000
time-zone 17
time-format 24
I hope help you with this information.
Tks
Daniel
Daniel Sobrinho
