cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

123
Views
5
Helpful
1
Replies
Highlighted
Beginner

Cisco SPA122 ATA with CUCM version 12

is the Cisco SPA122 supported on CUCM version 11 or 12 ? 

or any 3party ATA supported on CUCM ?

 

1 ACCEPTED SOLUTION

Accepted Solutions
Rising star

Re: Cisco SPA122 ATA with CUCM version 12

Hi,

You can configure Cisco SPA122 or any third party SIP device as a "Third-Party SIP Device (Basic)" or "Third-Party SIP Device (Advanced)". Here is the URL for configuring Cisco SPA112 with CUCM. The steps are same for configuring Cisco SPA122 or any third party SIP device.

https://community.cisco.com/legacyfs/online/legacy/1/1/5/79511-spa112withCucm_04052013.pdf

 

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.
1 REPLY 1
Rising star

Re: Cisco SPA122 ATA with CUCM version 12

Hi,

You can configure Cisco SPA122 or any third party SIP device as a "Third-Party SIP Device (Basic)" or "Third-Party SIP Device (Advanced)". Here is the URL for configuring Cisco SPA112 with CUCM. The steps are same for configuring Cisco SPA122 or any third party SIP device.

https://community.cisco.com/legacyfs/online/legacy/1/1/5/79511-spa112withCucm_04052013.pdf

 

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards