ā09-17-2019 05:00 AM
is the Cisco SPA122 supported on CUCM version 11 or 12 ?
or any 3party ATA supported on CUCM ?
Solved! Go to Solution.
ā09-17-2019 05:35 AM
Hi,
You can configure Cisco SPA122 or any third party SIP device as a "Third-Party SIP Device (Basic)" or "Third-Party SIP Device (Advanced)". Here is the URL for configuring Cisco SPA112 with CUCM. The steps are same for configuring Cisco SPA122 or any third party SIP device.
https://community.cisco.com/legacyfs/online/legacy/1/1/5/79511-spa112withCucm_04052013.pdf
ā09-17-2019 05:35 AM
Hi,
You can configure Cisco SPA122 or any third party SIP device as a "Third-Party SIP Device (Basic)" or "Third-Party SIP Device (Advanced)". Here is the URL for configuring Cisco SPA112 with CUCM. The steps are same for configuring Cisco SPA122 or any third party SIP device.
https://community.cisco.com/legacyfs/online/legacy/1/1/5/79511-spa112withCucm_04052013.pdf
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: