Cisco SPA232D

[rohanpatel]

We received cisco SPA232D with the wireless handset from cisco as promotion. I went through the documentation and never found its compatibility with Call Manager 8.5.

I configured the ATA as 3rd party SIP device but I cannot get it registered with Call Manager.

Has anyone got it working with Call Manager? I don't even know if it is compatible.

Any help will be great!!!

[George Thomas]

The SPA line is not compatible with CUCM, you probably have to configure as a 3rd party SIP device (potentially) to get it working.

Please rate useful posts.

[rohanpatel]

Thank you.... I am trying to get it configured as 3rd party sip device, but have not been successful yet.

I even open a TAC case, but cisco engineer is not able to get it working.

[shaucall46]

Hi

I have got one of these registered with CUCM as a 3rd Part SIP Device.

It has to be registered with a security profile of SIP 3rd Party with Digest.

Create a user in CUCM and enter Digest username(is used the DN) and password.

Create Profile for Device as 3rd Party SIP with Digest and associate profile with user account you created.

You will then have to go the management console of your SPA and enter the digest username/password and IP of your CUCM.

Hope this helps