Good morning, From two days I'have the following problem.
I've two uc540 ( one in milan one in switzerland) connected between a internet tunnel.
the milan extension are 10x, 11x and 12x and the Switzerland extension are 16x.
All work well except this item:
On extension 160 (switzerland) I put a call-forward all to extension 101 (milan) the
internal calls that arriving on 160 are not forwarded to 101.
all works when On extension 101 (milan) I put a call-forward all to extension 160
(switzerland) the internal calls that arriving on 101 are forwarded to 160.
All works well if I put a call forward between 160 or 101 to all other extension.
all works well if the call is forwarded to an external number
Until two days ago all worked well and nobaody have modified router configuration
Go to Solution.
IOS and CME are the same thing. There are no license issues.
Please remember to rate useful posts clicking on the stars below.
View solution in original post
Update IOS and check again.
thanks for help.
just two question:
need to upgrade only the ios or Also the cme software?
after upgrade ios it's necessary to upgrade Also the licenze or All will remain the same?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: