cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1140
Views
0
Helpful
15
Replies
Highlighted
Beginner

Cisco Unified Wireless IP Phone 7925G

How to add

Cisco Unified Wireless IP Phone 7925G

  phones..i mean how will be the connection .

I want to add 7925G wirless phones in 2901 cme 

15 REPLIES 15
Highlighted
Hall of Fame Master

Re: Cisco Unified Wireless IP Phone 7925G

Same as any other phone type.

Highlighted
Beginner

Re: Cisco Unified Wireless IP Phone 7925G

Is there any other Extra hardware required Required to add a wireless phones

Highlighted
Hall of Fame Master

Cisco Unified Wireless IP Phone 7925G

One or more APs.

Highlighted
Beginner

Re: Cisco Unified Wireless IP Phone 7925G

Ok so u mean if i want to add a wirless phones i need 2-3 wirless access

points for adding that i want to add 13 wirless phones

Highlighted
Hall of Fame Master

Cisco Unified Wireless IP Phone 7925G

Depends on coverage you need to give, you will get a different number and types of APs.

Please remember to rate useful posts clicking on the stars below.

Highlighted
Enthusiast

Re: Cisco Unified Wireless IP Phone 7925G

Are you asking how to get a wireles phone to register wirelessly or how to get CME to show the 7925G as a device?

I haven't worked with CME, but with CUCM, some phone types are not part of the default configuration and need to have their files uploaded before being recognized as a device type.

One of the engineers here has recently done this with the latest version of CME on a router.  He downloaded the latest tar file from the Cisco website and installed it on the router and the 7925G was recognized.

Ven

Ven Taylor
Highlighted
Hall of Fame Master

Re: Cisco Unified Wireless IP Phone 7925G

For your information Ven.

The tar file only contains auxiliary files. It is actually not needed to register and get working a 7925, or any other phone type. That is different from CUCM.

Highlighted
Beginner

Re: Cisco Unified Wireless IP Phone 7925G

is some body told me before no need ap for that ..

is it work with ap?or need any other specific harware to add a wireless

less phone

Highlighted
Hall of Fame Master

Re: Cisco Unified Wireless IP Phone 7925G

Excuse me but I've answered you before already:

A wireless phone needs a wireless AP to work.

It is as simple as that.

Highlighted
Cisco Employee

Cisco Unified Wireless IP Phone 7925G

As Paolo said, for any wireless device, you nee Wireless AP.

Check Table 2 for different AP supported -

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps9900/data_sheet_c78-504890.pdf

Highlighted
Beginner

Re: Cisco Unified Wireless IP Phone 7925G

*

is it need a specific Ap model or whether can use this model "WAP4410N-G5

Highlighted
Hall of Fame Master

Re: Cisco Unified Wireless IP Phone 7925G

Are you the end user? I weould recommend you contact a reputable consultant or Cisco partner for you needs, otherwise it will be very difficult for you to get anything done.

Highlighted
Beginner

Re: Cisco Unified Wireless IP Phone 7925G

Could u please tell me it need any specifc Ap model or?

could u please tell me wether

7925 G works with

WAP4410N-G5

Highlighted
Beginner

Cisco Unified Wireless IP Phone 7925G

Guys please help

7925g wil work with

WAP4410N or not