cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
530
Views
0
Helpful
2
Replies

CLI restriction/block for PSTN calls

cparapally
Level 1
Level 1

Hi Guys,

I have CCM 4.1(3) with 500 phones up and running. I would like to restrict/block CLI on few phones (nearly on 10 phones) when they dial PSTN numbers.

Could you please suggest how to do this?

Thanks,

Mady

2 Replies 2

dezoconnor
Level 4
Level 4

Follow the guide below:

- Create a new partition called UK_PTN_PSTN_CLID_RESTRICT

- Create a new CSS called UK_CSS_FULL_RESTRICT_CLID and insert the new PTN above and whatever other PTN's you previously have to allow internal and external calling (except maybe any previous PTNs you have that point to a gateway)

- Create a new Route Pattern i.e 9.@ and set the partition to be the newly created PTN. Also set the Calling Party Transform Mask and Calling Name Presentation to "Restricted". This route pattern will block CLID outbound.

- On which ever UDP's or Device's you wish to restrict CLID use the newly created CSS on the line.

HTH

Hi,

I have created like what you have said. Still I am able to see the number on called party number.

I couldn't able to understand where it went wrong!!!

Suggest me please..

Thanks,

Mady

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: