01-28-2011 05:33 PM - edited 03-16-2019 03:08 AM
Hi,
I have a questions.....Is possible configure a cluster of Unified Communication Manager 8.5 with server UCS C210 M2 and MCS7845I3?
For example:
UCS C210 M2 : PUB/SUB1 (Virtual servers)
MCS7845I3 : SUB2
Thanks for your help
01-28-2011 07:06 PM
Yes, you can have a mix of virtual and physical servers, the software doesn't care. What you propose is supported.
07-28-2011 01:34 PM
Hi,
Is posssible configure a cluster of CUCM 8.5 with server UCS210M2 and MCS 7825 for only 1000 IP phone?
For example:
UCS 210M2 pub and MCS 7825 sub.
07-28-2011 02:44 PM
Yes, the answer above is not specific to the MCS7845 platform. If you are using a supported virtual platform such as the UCS C210 then Cisco supports clustering of physical and virtual servers. Generally, you should match VM specifications for CPU, memory, and disk space to physical server (in your case, 7825).
Hailey
Please rate helpful posts!
07-28-2011 02:49 PM
Hi,
for encryption the calls on UCS i need KEY-CCM-ADMIN-K9 same for MCS?
07-28-2011 04:47 PM
Yes you need KEY-CCM-ADMIN-K9 regardless if you are using UCS or MCS servers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide