Guys, i am a little confused with licencing scheme used in CM. if i am making a proposal for call manager which licenses i have to include and why ?
like for example, i am going to use MCS server 7825, with CM 7.1 and the total number of device are 100 which includes 80 units of 7911 and 20 units of 7940 phones. based on the above details i came up with a BoQ like this:
- MCS7825I4-K9-CMC2 : this will be CM server.
- LIC-CM7.1-7825= : this is the applicance licences for the 7825 server
- LIC-CM-DL-100= : this is the Device unit licences
Now, are these licences ok or am i missing somoething like this part number: CM7.1-K9-X3250-M2
Q2: when i have purchase the DLU license, do i have to purchase the phone licences seperatly as well like this part number: SW-CCM-UL-7965 .
If you are doing DLU-based licensing, your count is wrong. It is not a 1x1 phone to DLU ratio. The number of DLU's consumed by a phone varies but for 794X/796X, you generally need 4 DLU's per phone. I do not recall the 7911 off-hand but that is definitely off. If you are doing CUWL (or UWL) licensing, this becomes an entirely different conversation.
Local Zone: This is a collection of all devices that are registered with Cisco Expressway. The local zone is divided to subzones. These subzones include the automatically crated default subzone and up to 1000 manually configured subzones. In additio...
Datacenter virtualization is the process of employing virtual hardware for designing, developing, and implementing the datacenters. It is often used as an umbrella term that entails different categories like application virtualization, server virtua...
Hiện nay trên thế giới có rất nhiều hãng sản xuất máy lọc nước ion kiềm đến từ Hàn Quốc, Nhật Bản, Đài Loan, Hoa Kỳ. Các thương hiệu với nhiều chủng loại với nhiều tính năng cũng như giá cả khác nhau không khỏi khiến người tiêu dùng đắn đo lựa chọn.Bài vi...
When talking about Dial Plan and Digit Manipulation Cisco Unified Communication Manager, three components play an important roles to perform the transformation of the calling and called parties.The Translation Pattern, Transformation Pattern and Rou...
ICE, STUN, and TURN are used to establish a MEDIA connection between two devices on different networks separated by firewalls and NAT servers. They do not apply to signaling between devices which means that if you cannot establish a signaling connec...