CM6 and VG200s

[jmachiggins]

Hi all. I'm just wondering if a VG200 can be used as an H323 gateway with CallManager 6. I would think that with H323 the model wouldn't matter at all.

Anyone know for sure?

Thanks

Justin

[Jaime Valencia]

VG224 can be configured for H323, MGCP and SCCP, VG248 is only SCCP

just found the link:

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_data_sheet09186a0080091de1.html

•Lower cost of ownership-The Cisco VG200 communicates with the Cisco CallManager using the Media Gateway Control Protocol (MGCP) or H.323 Version 2. It allows connectivity between a Cisco CallManager-based IP telephony system and legacy telephony equipment such as the PSTN, private branch exchanges (PBXs), and voice-mail systems. The Cisco VG200 provides a space-saving solution that can be managed remotely using network management applications such as CiscoWorks.

as you mention, CUCM version is really not relevant.

HTH

java

if this helps, please rate