05-18-2018 02:22 PM - edited 03-18-2019 12:25 PM
I'm looking for an example configuration for PLAR in CME 12.x. Both the source phone (x1001) and the destination phone (x1002) are SIP phones (8851). 1001 is located in an unattended lobby. 1002 is an admin assistant.
Thanks for your help.
05-20-2018 10:19 AM
Hi there
I haven't tried PLAR in CME. But typically the below config could help. Please try out and keep posted.
Config-1
ephone-dn 1
number 5000 ———– this number may be avoided (No need to call a courtesy phone)
intercom 4000 barge-in
ephone 1
button 1:1
autoline 1
As soon as you will go off-hook, 4000 will be dialed.
Config-2
ephone-dn 1
number 100
trunk 200
ephone 1
button 1:1
autoline 1
As soon as you will go off-hook, 200 will be dialed.
Hope this helps !!!
Cheers
Rath!
***Please rate helpful posts***
05-20-2018 11:07 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide