cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1018
Views
5
Helpful
4
Replies

CME 1861 + max ephone

habouzyad
Level 1
Level 1

Hi,

I m using cme on cisco 1861. when i configured the router, i have been surprised that it can only accept 12 ephone ( but in the data sheet 15 !!)??

this is the show version of the router :

###################################

#show ver
Cisco IOS Software, C1861 Software (C1861-SPSERVICESK9-M), Version 12.4(24)T3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 23-Mar-10 06:10 by prod_rel_team

ROM: System Bootstrap, Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1)

VOICE-SNC-LAVALIN uptime is 10 minutes
System returned to ROM by power-on
System image file is "flash:c1861-spservicesk9-mz.124-24.T3.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.htmlIf  you require further assistance please contact us by sending email to export@cisco.com. C1861-SRST-C-F/K9 (MPC8358) processor (revision 0x300) with 249856K/12288K bytes of memory.
Processor board ID FHK142773Q7
MPC8358 CPU Rev: Part Number 0x804A, Revision ID 0x20
12 User Licenses
10 FastEthernet interfaces
2 terminal lines
4 Voice FXO interfaces
4 Voice FXS interfaces
1 Voice MoH interface
1 cisco service engine(s)
128K bytes of non-volatile configuration memory.
126000K bytes of ATA CompactFlash (Read/Write)

Cisco

Configuration register is 0x2102
###############################################################

this is the all pack of the router :

refDESIGNATIONQty
C1861-SRST-C-F/K91861,8-user SRST or CME,CUE,4FXS,4FXO,8POE,SP Svcs,HWIC slot1
CAB-ACEAC Power Cord (Europe), C13, CEE 7, 1.5M1
SCUE-ISE-7.0-K9Cisco Unity Express base release - 7.01
CUE-LANG-ENUCisco Unity Express - North American English1
CUE-LANG-FRACisco Unity Express - European French Language Option1
SL1861-SRST-C-15U1861 CME/SRST + CUE Feature Lic upg from 8 to 15 users1
S186RSPSK9-12424TCisco 1861 IOS SPSK9-SPSK9 FACTORY UPG FOR BUNDLES1
MEM1860-128CF128MB CF for 18611
PWR-1860-220W1861 Desk Top Power Adapter 100-240VAC1
CCP-CDCisco Config Professional on CD, CCP-Express on Router Flash1

Please , could someone tell me what is exactly the problem?

Many thanks

Hicham

4 Replies 4

Justin Brenton
Level 4
Level 4

Hi Hicham,

•  Integrated Cisco Unified Communications Manager Express or Survivable Remote  Site Telephony for call processing for up to 12 users

License Support

The Cisco 1861 Integrated Services Router supports a maximum  of 12 user licenses based on different models.

From this doc:

http://www.cisco.com/en/US/docs/routers/access/1800/1861/hardware/quick/guide/1861qsg.html

Hope this help, please vote if so

Regards,

Justin

paolo bevilacqua
Hall of Fame
Hall of Fame

Contact you reseller with the foloowing question.

how do I enable SL1861-SRST-C-15U ?

if they don't help, contact Cisco directly. You must have the Cisco SO number for that.

brendand05
Level 1
Level 1

You need to install the 15 user feature license.

That will give you approx 19 (15 + 4 float) licenses.

Then go to telephony-service and specify

max-ephone xx

max-dn xx

----------------------------------------------------------------------------------------------------------------------
If this answers your question. Please mark the post as 'answered' and rate replies

I think it was clear alreaady, as explained in my post above, that is necessary to apply the add.l license.

Now if you have exact information on how to do that (what is required, what are the steps to follow), that would be more useful.

For example, I don't know that myself.