cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
552
Views
0
Helpful
8
Replies

CME 7.1

clark white
Level 2
Level 2

Hi,

I have a issue with only 1 user,

when user A dials user B , User A is gets a busy tone though user B is not busy, user A goes on hook and dial again with in a 2 sec still it is a busy tone, when user A again dial thrice to user B the call gets connected, sometime call get connected in 1st attempt sometime 2nd attemt but this is happening with only 1 user.

Any hints please.

2 Accepted Solutions

Accepted Solutions

ronpatel
Level 8
Level 8

Hi

Also see if the DN of phone B is configured twice for example

ephone-dn  X
number 2222

ephone-dn  y  dual-line
number 2222

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

View solution in original post

Hi

You can assign same number to two different phone. It would be shared line.

Like

eohone-dn 1 dual/oct line

Number 11111

Ephone 1

Button 1:1

Ephone 2

Button 1:1

If answers are helpful and the issues is resolved, Please rate all posts by clicking stars below the answer.

Regards
Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

View solution in original post

8 Replies 8

ronpatel
Level 8
Level 8

HI

What is the firmware you have in your Ip phone A.

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

ronpatel
Level 8
Level 8

Hi

Also see if the DN of phone B is configured twice for example

ephone-dn  X
number 2222

ephone-dn  y  dual-line
number 2222

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Hi,

yes it is there same extension to two ephone-dn, this might could be the reason for this issue.

Hi

I have seen similar issue and the issue was resolved by removing the duplicate ephone-dn confgration.

Regards
Ronak Patel

Rate all helpful post by clicking stars below the answer.

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Thanks patel,

I have 1 question here if suppose two helpdesk needs a same extension ,then what can be configured for them.

Hi

You can assign same number to two different phone. It would be shared line.

Like

eohone-dn 1 dual/oct line

Number 11111

Ephone 1

Button 1:1

Ephone 2

Button 1:1

If answers are helpful and the issues is resolved, Please rate all posts by clicking stars below the answer.

Regards
Ronak Patel

Regards Ronak Patel Rate all helpful post by clicking stars below the answer.

Hi

U deserve that i will do  once i do the configuration.

Thanks

Thanks patel,

U are correct , U deserve the votes.