04-29-2013 02:24 AM - edited 03-16-2019 05:02 PM
Please give a link to the manual for the auto-attendant!
I downloaded its-CISCO.2.0.1.0.tcl, but did not find (.AU music files) for it!
My write:
service autosec flash:its-CISCO.2.0.1.0.tcl
param operator 1042
paramspace english language en
paramspace english index 0
paramspace english location flash:/en (files from the app-h450-transfer.2.0.0.1)
paramspace english prefix en
param aa-pilot 1040
dial-peer voice 1040 voip
service autosec
destination-pattern 1040
session target ipv4:10.10.8.1 (LOCAL IP VOIP CISCO)
incoming called-number 1040
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
04-29-2013 07:24 AM
I don't think there is a manual for this small script.
04-29-2013 09:46 AM
04-29-2013 12:46 PM
Nirmal Issac wrote:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/cme40tcl.html
That is the manual for B-ACD/AA, that is different from the script the OP asked about.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide