cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
141
Views
0
Helpful
5
Replies
Highlighted
Beginner

CME 8841 SIP phones backlight

Is it possible on CME to set the backlight settings for 8841 SIP phones?

 

Thanks.

5 REPLIES 5
Rising star

Re: CME 8841 SIP phones backlight

Beginner

Re: CME 8841 SIP phones backlight

Yes I have, there are 2 resolutions offered neither of which I believe fulfill the requirements -firstly, configuring service parameter under telephony service would apply to all phones when we want to apply only to specific phones, and secondly configuring an ephone template cannot be used when this can only be applied to ephones (not SIP voice register pools)?

Rising star

Re: CME 8841 SIP phones backlight

Yeah I of course saw that but are the similar commands not there for the voice register template or voice register global ?

 

 

Rising star

Re: CME 8841 SIP phones backlight

I am not seeing a reference to it int he following guides

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/command/reference/cme_cr.pdf

 

Very interesting questions if the other post isn't true that those settings apply to sip phones as well which I would not think they would.

Beginner

Re: CME 8841 SIP phones backlight

There appears to be a service command under voice register but it doesn't accept the same options, and that's where I got stumped!

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards