cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1033
Views
0
Helpful
1
Replies
Highlighted
Contributor

CME 9.1 shared line between SIP and SCCP device

Release notes state this is supported.

Trying to get the extension 6491 to appear on pool 25 with no luck. See error below;

voice register pool  25   <<<<<<<<SIP PHONE

busy-trigger-per-button 2

id mac 8478.ACE6.27B1

type 8961

number 1 dn 25

template 1

codec g711ulaw

no vad

ephone-dn  150  octo-line        <<<<<<<<<<<<<SCCP DN

number 6491

label 6491 - Open, Open

description +19048186491

name Open, Open

call-forward busy 6010

call-forward noan 6010 timeout 20

ephone-dn-template 1

3925#config t

Enter configuration commands, one per line.  End with CNTL/Z.

3925(config)#voice register pool  25

3925(config-register-pool)#nu

3925(config-register-pool)#number 2 ?

  dn  Define a dn tag

3925(config-register-pool)#number 2 dn 150

voice register dn [150] not configured.

3925(config-register-pool)#

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Advocate

CME 9.1 shared line between SIP and SCCP device

Jason,

You need to make the ephone-dn (TAG) and the

voice register dn (TAG) equal

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
1 REPLY 1
Advocate

CME 9.1 shared line between SIP and SCCP device

Jason,

You need to make the ephone-dn (TAG) and the

voice register dn (TAG) equal

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards