cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

244
Views
0
Helpful
1
Replies
Highlighted

CME: assign extension to sip trunk

Hi,

Instead of using a prefix to use a separate sip trunk, I would like an IP phone to use a separate sip trunk for it's 2nd line.

So I have configured a 2nd line on an IP Phone to use extention 96:

ephone 1
 mac-address ****
 name ***
 button 2:96

ephone-dn 96 dual-line
 number 432

and then I would like this extention (with number ending in 432) to always use a certain SIP server.

I believe I need a dial-peer to achieve this, similar to:

dial-peer voice 432 voip
 destination-pattern ???
 voice-class codec 1
 voice-class sip dtmf-relay force rtp-nte
 session protocol sipv2
 session target sip-server
 dtmf-relay rtp-nte
 no vad

How do I join the dial-peer to the extention? (for analogue I would put "trunk 1 monitor *voice port number* " on the extention).

Any help much appreciated,

Jonathan

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hi.You can try with answer

Hi.

You can try with answer-address 432 under your dial-peer 432.

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"

View solution in original post

1 REPLY 1
Highlighted

Hi.You can try with answer

Hi.

You can try with answer-address 432 under your dial-peer 432.

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"

View solution in original post

CreatePlease to create content
Content for Community-Ad
Future of Work Virtual Summit Day 5

Cisco COVID-19 Survey