12-15-2014 06:25 AM - edited 03-17-2019 01:19 AM
Hi,
Instead of using a prefix to use a separate sip trunk, I would like an IP phone to use a separate sip trunk for it's 2nd line.
So I have configured a 2nd line on an IP Phone to use extention 96:
ephone 1
mac-address ****
name ***
button 2:96
ephone-dn 96 dual-line
number 432
and then I would like this extention (with number ending in 432) to always use a certain SIP server.
I believe I need a dial-peer to achieve this, similar to:
dial-peer voice 432 voip
destination-pattern ???
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
no vad
How do I join the dial-peer to the extention? (for analogue I would put "trunk 1 monitor *voice port number* " on the extention).
Any help much appreciated,
Jonathan
Solved! Go to Solution.
12-15-2014 06:34 AM
Hi.
You can try with answer-address 432 under your dial-peer 432.
HTH
Regards
Carlo
12-15-2014 06:34 AM
Hi.
You can try with answer-address 432 under your dial-peer 432.
HTH
Regards
Carlo
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: