Have fully function Cisco Call Manager Express, running 20 phones SCCP 7961 mainly.
Have purchased some new 8800 series phones 8861, 8821, and 8831.
Trying to get the 8861 registered with my CME.
My config is as follows:
voice service voip ip address trusted list ipv4 x.x.x.x ipv4 y.y.y.y cti csta mode basic no cti shutdown allow-connections sip to sip no supplementary-service sip moved-temporarily no supplementary-service sip handle-replaces fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none sip registrar server
voice register pool-type 8821 phoneload-support reference-pooltype 9971 voice register global mode cme source-address internalIPAddr port 5060 max-dn 96 max-pool 24 load 8861 sip88xx.11-7-1-17.loads load 8821 sip8821.11-0-3SR1-1.loads create profile sync 0445144314544414 auto-register password XXX auto-assign 1001 to 1010 ! voice register dn 48 number 3333 voice register dn 49 number 3333
voice register pool 23 busy-trigger-per-button 2 id mac 0059.DCDE.036C type 8861 number 1 dn 48 voice register pool 24 id mac 00A2.89FB.A3EA type 8821 number 1 dn 49
IOS - Version
System image file is "flash:c2900-universalk9-mz.SPA.156-3.M1.bin"
There are cases/situations where we have to configure custome CPTONE to resolve FXO disconnect issue. Following are situations which can arise due to FXO disconnect issue:
Phone A calls Phone B, Phone B does not answer. Phone A then goes on-hook but Phon...
Cisco announced major enhancements today to Webex Contact Center. Learn more about the highlights including
better support for the needs of large contact centers worldwide
improvements in the agent and cust...
SymptomsI’m doing a factory reset on the mobile board and it’s giving me the same issues that I wasn’t able to also send over last time. It says that it can’t connect to the server because of a firewall (we don’t have one) and then sometimes it...
Cisco Webex Calling is a cloud service that offers enterprise-grade calling features delivered from the Cisco Webex cloud. This platform is part of the complete Webex collaboration suite that serves the calling, messaging, meeting, team collaboration and...
Cisco SX20 camera moving left right and shaking continuously. We have factory reset the devices still it is a same problem. Even change the camera of working devices with issue devices still the problem.Now the software version of the device is ...