cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1161
Views
0
Helpful
5
Replies

CME - direct incoming call from PSTN

vip80y_cisco
Level 1
Level 1

Hi Guys,

Is there any way to direct specific incoming call from PSTN to a specific dial-peer range number on CME using COR? - 3 CMEs, only 1 cme connected to PSTN.

for example, public phone number 7771234 that originate from PSTN only allow to ring dial-peer range 7771000-7771005 on CME-A then public phone number 7771235, only allow to ring dial-peer range 7771006-7771010 on CME-C.

please advice

Thanks in advance

5 Replies 5

paolo bevilacqua
Hall of Fame
Hall of Fame

Do you need to direct on the basis of phone line, or calling number ?

Hi, thanks for your reply...

I need to direct on the basis of calling number

thanks,

terrence

Diffrent details but same principle:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

On the DP matrching answer-address, translate called number to desired destination.

Hi,

Thanks for the links.

Do you have any documentation with COR?

Restrict outgoing call seems to be easier than incoming...

Thanks,

Terrence

I would use number transaltion in your case actually.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: