CME - direct incoming call from PSTN

[vip80y_cisco]

Hi Guys,

Is there any way to direct specific incoming call from PSTN to a specific dial-peer range number on CME using COR? - 3 CMEs, only 1 cme connected to PSTN.

for example, public phone number 7771234 that originate from PSTN only allow to ring dial-peer range 7771000-7771005 on CME-A then public phone number 7771235, only allow to ring dial-peer range 7771006-7771010 on CME-C.

please advice

Thanks in advance

[paolo bevilacqua]

Do you need to direct on the basis of phone line, or calling number ?

[vip80y_cisco]

Hi, thanks for your reply...

I need to direct on the basis of calling number

thanks,

terrence

[paolo bevilacqua]

Diffrent details but same principle:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

On the DP matrching answer-address, translate called number to desired destination.

[vip80y_cisco]

Hi,

Thanks for the links.

Do you have any documentation with COR?

Restrict outgoing call seems to be easier than incoming...

Thanks,

Terrence

[paolo bevilacqua]

I would use number transaltion in your case actually.