CME DND work with Feature ring?

victorchen · ‎06-10-2013

Hi,

If my phone button assign wirh feature ring? Can I enable DND on phone as well?

Will DND work?

Thanks

Victor

Rob Huffman · ‎06-10-2013

Hi Victor,

This setting is configuable

SCCP: Blocking Do Not Disturb

To block DND on phones that have buttons configured for feature ringing, perform the following steps. DND is enabled by using the DND soft key on Cisco Unified IP phones that support soft keys.

Prerequisites

•Cisco Unified 3.2.1 or a later version.

•Phone line must be configured for feature ring with the button f command.

•Call-forwarding no-answer must be set for a phone to use DND to forward calls. For configuration information, see "Configuring Call Transfer and Forwarding". No other configuration is necessary for basic DND.

Restrictions

•Phone users cannot enable DND for a shared line in a hunt group. The soft key displays in the idle and ringing states but does not enable DND for shared lines in hunt groups.

SUMMARY STEPS

1. enable

2. configure terminal

3. ephone phone-tag

4. no dnd feature-ring

5. end

DETAILED STEPS


	Command or Action	Purpose
Step 1	enable Example: Router> enable	Enables privileged EXEC mode. •Enter your password if prompted.
Step 2	configure terminal Example: Router# configure terminal	Enters global configuration mode.
Step 3	ephone phone-tag Example: Router(config)# ephone 10	Enters ephone configuration mode. •phone-tag—Unique sequence number that identifies the ephone to be configured.
Step 4	no dnd feature-ring Example: Router(config-ephone)# no dnd feature-ring	Enables ringing on phone buttons configured for feature ring when the phone is in DND mode.
Step 5	end Example: Router(config-ephone)# end	Returns to privileged EXEC mode.

Examples

In the following configuration example, when DND is activated on ephone 1 and ephone 2, button 1 will ring, but button 2 will not.

ephone-dn 1

number 1001

ephone-dn 2

number 1002

ephone-dn 10

number 1110

preference 0

no huntstop

ephone-dn 11

number 1111

preference 1

ephone 1

button 1f1

button 2o10,11

no dnd feature-ring

ephone 2

button 1f2

button 2o10,11

no dnd feature-ring

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmednd.html

Cheers!

Rob

"go easy...step lightly...stay free "

- The Clash