Hi I have CME 10.0 and would like to configure FAC on SIP phones.
I have an 3 ISDN and was thinking of grouping these trunks, but when I look on the FAC configuration "lpcor" commands can only be applied on the "voice-port".
I need to have FAC for different dial-pattern one for NDD, moible and IDD.
LocalUser needs FAC for NDD, Mobile and IDD
NDDUser needs FAC for Mobile and IDD
IDDUser needs FAC for IDD only
My dial-peers are as follows:
dial-peer voice 2 pots
description ### Local Calls ###
clid network-number 026635200
dial-peer voice 3 pots
description ### NDD Calls ###
dial-peer voice 4 pots
description ### Mobile Calls ###
dial-peer voice 5 pots
description ### IDD Calls ###
Hope someone has an idea on how to configure this for SIP phones or SCCP phone config can also i will just try to adopt them.
Please have a look a the following document:
you can assign it per users as well not only the voice port.
i have already read that document before i post here. could you give me a sample configuration for my scenario above?
i have "lpcor policy FAC"
(reject ) localuser
(accept fac) manager
then i applied the lpcor FAC outgoing on voice port 0/0/0
but it is not working. i was trying to block "localuser" to call using ISDN on port 0/0/0 and manager to use this given that he inputs FAC.
what could i have missed? or is it that my understanding is wrong.