05-21-2014 03:58 PM - edited 03-16-2019 10:51 PM
Hi there,
I have an install of a CME with FXO ports going live this week and I was wondering if someone could check over my sound extract and confirm for me that the frequency is 415 and cadence is 510 280. I can't test until the lines go over but just want to make sure as best as I can that it will be a smooth changeover.
Also here is my cptone and voice port config:
voice class dualtone-detect-params 1
freq-max-deviation 30
cadence-variation 20
voice class custom-cptone DISCONNECT_CP
dualtone disconnect
frequency 415
cadence 510 280
voice-port 0/1/0
trunk-group PSTN_TRUNKS 1
supervisory disconnect dualtone mid-call
supervisory answer dualtone
supervisory custom-cptone DISCONNECT_CP
supervisory dualtone-detect-params 1
cptone FR
connection plar opx 100
caller-id enable
Thanks
Carl
Solved! Go to Solution.
05-21-2014 08:49 PM
Hello Carl,
The parameters are correct but the sum of cadences must be greater than "timeout wait-release" under the voice-port. You can check the timer with the command "show voice port 0/1/0".
eg if the timer is 1 sec , 510+280=790ms < 1s , hence change the cadence value to '510 280 510 280".
Regards,
Harsh
05-21-2014 08:49 PM
Hello Carl,
The parameters are correct but the sum of cadences must be greater than "timeout wait-release" under the voice-port. You can check the timer with the command "show voice port 0/1/0".
eg if the timer is 1 sec , 510+280=790ms < 1s , hence change the cadence value to '510 280 510 280".
Regards,
Harsh
05-25-2014 08:31 AM
Sorry Harsh,
I'm still getting problems with this, i've amended as you have said and adjusted my wait release to 1 second but it is still not disconnecting. Any ideas?
Thanks
Carl
06-04-2014 01:17 PM
Thanks Harsh,
My issue was the cadence value was incorrect. I managed to correct it and all is well.
Thanks
Carl
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide